NovaComp Skin Preparation

Vinyl Face Preparation

Cut vinyl 150mm more than the overall size of the boxFit black clips approx. 150mm centres around the perimeter as shown

To Fit The SkinWhen tension tool is in position move from side to side over the clip to press clip down

NovaComp Skin Material

Material Recommended for NovaComp:

VuFlex Backlit Premium FR

Roll Width 1600mm / 3200mm / 5000mm
Roll Length 30m
Base Fabric PES DIN ISO 2076
Yarn 110d/tex
Weave 1/1L
Type of Coating PVC
Weight 500 g/m2
Tensile Strength 2700/2700 (WARP/WEFT)
Tear Strength 280/280 (WARP/WEFT)
Adhesion 18 N/cm
Cold Resistance -30°c
Heat Resistance +70°c
Light Fastness to DIN 54004
Crack Resistance to DIN 53359 A
Flame Retardency to DIN 4102 B1 M2
Finish Both sides acrylic lacquered

This product has been produced for digital inkjet printing, but customers must satisfy themselves that the product will perform to their requirements by testing prior to production run taking place.Specification details are offered in good faith but will not be accepted in matters of warranty

Skin SpecificationCut size = +152mmBleed size = +76mmVisual Size = (full bleed so same as box size)