Guide to Fabricating Overhead Lighting

Quick reference guide:

Cut profile to desired length

Slide white reflective aluminium strip into interior channel

Secure gasket and end cap to one end

Turn unit face up and fit tape LED to the centre of the white aluminium reflective strip

Turn unit face down and slide out reflective strip about 500mm to enable you to connect the driver

**it is recommended that the driver is earth bonded**

Slide in diffuser

Then slide in arm bolts for the brackets

Secure second end cap and gasket

*The above has been issued purely as a guideline, and can differ for each individual project *

Back to NovaBeam