Guide to Fabricating NovaComp
NovaComp Support Chart
| Box Width | Number of Supports |
| Up to 1000mm | 2 |
| 1000-1500mm | 3 |
| 1500mm – 2250mm | 4 |
| 2250mm – 3000mm | 5 |
| 3000mm – 4000mm | 6 |
| 4000mm – 5000mm | 7 |
Use all single supports on boxes up to 1500mm in heightOn boxes 1500 – 2000mm use double support ends onlyOn boxes 2000 – 4000mm use double support throughout box except at open endsOn boxes 4000mm and above use EXTRA WIDE supports at endsWHEN BOXES EXCEED 2200MM IN HEIGHT ENSURE LENGTH IS NO MORE THAN 2200MM
Quick Reference Guide
NOV7000SC (200mm deep) or NOV7100SC (135mm deep) + NOV7200SC mitred to length and height of box + NOV7300
Vertical support sections are cut as 6mm less than height of box and are fitted at a maximum of 750mm centres
Backing sheet is cut at 32mm less than the height of the box
Multiple box sections are aligned using ACC195 in the screw port facility on the NovaComp body section, along with joining plates.
*The above has been issued purely as a guideline, and can differ for each individual project *